1. Fully charge your X5 Disinfection Wand with a compatible charger.
2. Unlock the safety lock and unfold the flip panel.
3. Double click the sterilizing button to start the process.
4. For best result, it is recommended to scan back and forth on the surface for 5 to 10 times with a distance of approximately 3cm.
5. Disinfection will finish automatically in 3 minutes or you may press the button again to stop the process at any time
1.The first use requires a full charge. It takes 3 ~ 4 hours to fully charge. Generally, it can be used for 50 minutes after being fully charged
2. In order to prevent ultraviolet rays from directly hitting the eyes and skin, we deliberately added gravity sensing function to the product. As long as the product rollover angle is greater than 45 degrees, the gravity sensor will cause the product to automatically turn off the light. This is a special function design, please do not think that the product is defective.
3. The product on/off switch has also has a quick double-click function. It is also a product specifically designed to prevent children from using it. Because children under 5 years old can't do double-click action under 200 milliseconds. Therefore, when you double-click the product switch, you need to double-click the switch quickly.